This video shows the operation and manuevability of the Deere CT322.  Our machine is NOT FOR SALE.

John Deere CT322 Tracked Loader Rental

A Skid Steer is often referred to as a Bobcat, which is a name of a specific brand of skid steers.  Skid Steers get their name from the fact that in order to make a turn, the tires "skid" in opposite directions, one side going forward and the other side stationary or in  reverse.  This allows the machine to perform a zero-radius turn.  They are also referred to as skid loaders.

A tracked loader differs from a wheeled skid steere in that rather than four wheels, it operates on two rubber tracks.  The tracks allow it to get better traction while putting less ground pressure, this makes it ideal for soft surfaces where a wheeled loader would be likely to dig in or get stuck.  Our John Deere tracked machine is considerably more power than similar sized wheeled machines.

We offer the John Deere 322CT, a hard-working tracked skid-steer loader, with lots of maneuverability and great all-around performance and productivity.  Our John Deere will outperform most comparable size machines, meaning you will get more done in less time!

A hard-working skid-steer loader, with lots of maneuverability and great all-around performance and productivity.

Accessories available for rental include:
Landscape Rake / Rock Hound
Pallet Forks
York Rake


John Deere CT322 Specifications

ENGINE
Manufacturer John Deere
Model 4024T
Gross Horsepower 66
Net Horsepower 62
Rated RPM 2800
Cylinders 4
Displacement, 149 cu in
Engine aspiration Turbocharged
Fuel Capacity 18 gal


HYDRAULIC SYSTEM
Standard Pump Flow, 19 gpm
System Pressure, 3450 psi
Hydraulic power, calculated, 38.2  hp


PERFORMANCE
SAE Rated Oper. Cap.(ROC)35% tip lb 2,200
ROC at 50% of tipping load lb  3,200
Tipping Load, standard, lb 6,400
Boom, lb 3,410
Bucket, lb 6,050
Lift Arm Geometry Vertical lift


DRIVE TRAIN
Maximum Ground Speed, standard, mph 6.1
Standard Rubber Track Width 12.6"
Ground Pressure, Standard Track psi 5.1
Tractive Effort, lbs 8,000
Track Gauge, center to center 58.9"


DIMENSIONS
Length with Bucket, 125.8"
Length without Bucket, 102"
Width without bucket 71.5"
Height to ROPS 76.8"
Height to Hinge Pin 115.2"
Dump Height 90.8"
Dump Reach 31.8"
Dump Angle, degrees 43º
Bucket Rollback @ ground, degrees 33º
Ground Clearance 9.6"
Angle of Departure, degrees 28.5º

OPERATING WEIGHT, STANDARD 8,305 Lbs.

How Does The John Deere Compare?
Click for a comparison of the John Deere to the competition

Click here for a Product Brochure
 




Landscape Rake / Rock Hound

Grade, level and scarify in close quarters. Break up lumpy soil and pick up rocks as small as 3/4 inch. Use it for ground preparation, for seeding, sodding, and lawn leveling-one pass coverage.

Picks up rocks down to 3/4 in. (19 mm) and larger, and most 1/2" rocks.
Hydraulic cylinder opens top cover - for easier dumping, and also allows the bucket and cutting edge to be used to push and scrape debris.
Rake bars provide better leveling by providing longer ground contact.






Pallet Forks

Move bulky or palletized material easily. Hook on a pallet fork and move your bagged or bulk material fast. In industrial plants and landscaping, handle baled or pallet materials. Also a handy attachment for the construction site. Ideal for all kinds of farm chores and fertilizer handling.

Large, square holes in back screen provide excellent fork/load visibility.